Telescopic Sliding Gate Automation System
Telescopic sliding gate system is the perfect solution for extra wide opening areas & where in there is very less or no run-back place for single sliding arrangement to install the conventional sliding gates. They could be manufactured in two, three or more gate panels and therefore reduce the required back run for resting space.
Each telescopic gate panel will move at a different speed so that the final position is reached simultaneously, operated by specially design telescopic mechanism. The telescopic gated can be personalized and are manufactured to specific site requirements, they are suitable for medium to heavy duty applications.
- Telescopic gates best suitable to cover wider openings & limited back space.
- Can be designed in 2 to 3 leafs for single slide motion.
- Modern design and robust construction.
- Partial opening can be easily achieved.
- Faster opening times, both open & close
- Less space is required
Round Corner Sliding Gate Automation System
Round corner gate door is the ideal, exclusive solution for residential gate entrance with limit space situations. This type of gate operates just like the name implies by bending to one side of the gate and sitting parallel to the wall. It is especially advantageous if, the gate has no free remain space to take places or store at.
- Perfect for sites where there is little or no back-run/ parking space
- Wheels mounted within gate leaves slide over embedded ground tracks
- To achieve the maximum clear opening area where the run back is very restricted
- Compact size allowing for space utilization
Mild Steel Gate Design
Mild steel gate has been manufactured with precision range in different compact designs, tolerances and are extremely easy to install. These are specifically designed to suit all architectural designs and set up on a structural metal frame; good quality pivots (hinges) or wheels.
- Mild steel gates are widely used and economical option among all the types of gates.
- At each end-track stopper is placed to absorb any impact and to hold the gate in the open or closed position.
- Gates are specially designed with top and bottom pivot mechanism.
- Dust proof operating mechanism increases the life of gates.
- Gates leafs are free form sagging/bending.
- New mechanical solutions guarantee long life and high quality of its product.
- Easy to install operator.
- Various industrial gate designs available to suit clients choice.
- Sand blasting, hot deep galvanizing process, painting can be provided.
This Straight Arm Barrier Gate is a heavy duty barrier that can support up to 6 meter arm with slow steady 6 sec opening speed. It is ideal for industrial factory that requires widest entrance in order to accommodate big truck. With 2 units of these Barrier Gates installed facing each other; it can be achieved maximum 12 meter space clearance at entrance.
Suitable for outdoor as well as indoor parking area at airport, shopping mall, warehouse, hotel, factories, condominium, car rental company, etc. Can also be customized to be used together with any auto-pay or ticketing parking system.
- Heavy duty. AC motor is stronger and maintenance free.
- Sturdy and strong housing (2.5 mm thickness mild steel). Housing is polished, phosphorized and further finished with plastic coating to ensure long lasting bright colors.
- All internal parts inside housing is protected by cam lock to avoid tampering.
- User friendly. Clutch can be conveniently released without opening casing. Arm can be easily lifted or closed by hand after clutch is released. More intuitive control – 3 separate input for arm up, stop and down.
Folding Arm Barrier Gate support 90˚ folding arm to accommodate low height ceiling such as basement parking and multi-level parking and affordable for site with medium traffic.
- High accuracy with low comsumption and less noises.
- Manual Release Cluntch: When loss of power, it can manually open and close the barrier.
- Can be working in -45 degree.
- Can be replced easily, and save cost.
- Pressure spring can avoid damage casued by tention spring, for more safety.
The traffic barrier gate is widely used for the facilities of parking, traffic or toll system. Max lenth of boom can be choosen 6m. This type of barrier gate could match with direct boom (pole), fold boom or fence boom. Advanced manual release. Clutch Key can be used to open the clutch when electricity is cut off. All the process is soft without any noise and shaking. This barrier gate has many input terminals for photocell, airwave switch, loop detector, back-up battery (for DC Motor), toll gate system and output terminals for lamp.
1. It is widely used for the facilities of parking, traffic or toll system.
2. Arms can be chosen from 3 meters to 6 meters.
3. Clutch key can be used to open the clutch when electricity is cut off.
4. Many input terminals for photocell, Airwave switch, loop detector, back-up battery(for DC Motor), toll gate system and output terminals for lamp.
Advertising road barrier is a new generation of digital media gateway which can adapt to the modern, safe, stable, efficient and high quality management come out. At present, the media is closely related to the life of the media, the more close to the life, the more benefit of life, the more vulnerable to be attention. Advertising road barrier media is the information bridge for the owners, community people and advertisers.
- The case is durable and waterproof, which can be used in outdoor environment.
- The board can be disassembled, easily changed and easy to operate.
- The safety and reliability of the running of the gate are greatly improved.
- In addition to the common interface, the system increases the air pressure wave and other protective equipment, so that the system has the capability of smashing the car and people.
- The system adopts standard electrical interface, which can be easily connected to other systems selected by the user.
- Stable operation, low noise and long service life.The advertising barrier can interchange the direction of left and right.
Residential use (600Kg, 24Vdc)
- Optimal operation mode: The openers are mounted far from the gate hinges, which results in high driving force efficiency. In addition, 24VDC working voltage ensures the safety and energy-saving.
- Mechanical flexibility: The gate openers are vertically adjustable in accordance with the ground unevenness. The adjustability ranges from the routine 8cm to custom-tailored 30cm.
- Unlimited gate opening angle: With this unit the gate can be opened up to any angle as the user wishes, except for the restriction imposed by gatepost position.
- Simultaneous lockup: Invented by Alcano Co.,Ltd this function is a patented technique, which integrates the closing motion with the gate lockup action. No additional electric lock in needed. However, safe, reliability and theft-proof effect are better guaranteed.
- Optional manual mode: In time of power failure, the unit can easily be switched to manual mode by using the clutch key. Or the user can equip the unit with backup power supply such as storage battery, solar energy battery, etc.
- Easy installation: Since the installation has nothing to do with the gateposts, the unit can be applied to any kind of swing gates.
residential use (1000Kg, 24Vdc)
- Soft start and soft stop.
- 24V low safety voltage.
- Convenient Midway mode.
- Built in adjustable auto-close.
- Electromagnetism limit switch.
- Secure rolling code for the remote.
- Stop/ reverse in case of obstruction.
- Intellectualized soft start and soft stop.
- Emergency release key in case of power failure.
- Built in max motor running time (MRT) for multiple safety protection.
electromechanical rams & residential swing gates (400Kg, 24Vdc)
- Robust structure, monobloc aluminium, perfect for a residential and collective usage
- Mechanical stops available in open and close position (optional)
- Rapid unlocking device, with personalized steel key (for STING) or plastic key (for MAC) in case of power failure
- Adjustable fixing plate, to be screwed (optional)
- Steel mechanics and gearing
electromechanical rams & residential swing gates (400Kg, 24Vdc)
- You can mount the operator also in a perpendicular way compared to the door, with vertical mounting plate.
- Perfect for larger size pillars.
- Sliding arm. (optional)
- Quick release with customized metal key, protected from the weather.
Showing 1–15 of 25 results